Correctly operating your watch it vital to maintain the quality of the watch and movement.
- Normal Position.
- Date Correction Position.
- Hand Setting Position. Stop-second with interruption of motor impulses.
Calendar Adjustment:
Unscrew the crown counter-clockwise to release the crown before pulling it to position 2. Rotate the crown to adjust the date. Note: The date will change when the time is in the 12 hour PM range, this should be kept in mind when setting the date. Screw the crown clockwise to re-secure the crown & seal the watch.
Time Adjustment:
Unscrew the crown counter-clockwise to release the crown before pulling it to position 3. Rotate the crown to adjust the time. Note: The calendar date will change if adjusting the time within the 12 hour PM range. Bear this in mind when setting the time to AM or PM. Screw the crown clockwise to re-secure the crown & seal the watch.
Automatic/Manual Winding:
The automatic winding takes place as you move. If necessary, the watch may also be wound by hand by turning the crown in normal position. Wind 15-20 times and it will start to move naturally after shaking slightly.
Crown:
The Treasure Seeker crown is a twin lock construction, extra care must be taken when screwing the crown down, if you feel any resistance stop and unscrew, try to screw the crown down in another location, check the crown is screwed down tight before entering water.
Saturation Diving:
It is not recommended you take your Treasure Seeker into a saturation diving system, any damage caused by using the Treasure Seeker watch in this
pressurised environment is not covered under our warranty.